Closed
Truck equipment
Tender ID: 592683
Tender Details
Organisation:
Tender #:
2025/26 - 013
Status:
Closed
Publish Date:
20 August 2025
Closing Date:
9 September 2025
Closing Time:
05:00 PM (Australia/Victoria)
Tender Description
Tenders are invited for the Supply and Delivery of one (1) tri axle float trailer 18.5 tonne capacity Towong Shire is positioned in far north-eastern Victoria and is home to around 6,000 residents and many more visitors across an area of 6,600 square kilometres.
The economy of the region revolves around a rich agricultural sector, tourism and timber production and processing.
The proposed unit will be located at Councils' Tallangatta depot situated approx 45km east of Wodonga.
The following requirements as listed below are to be considered and included in the final quote which is to be supported with finished design renders or photos of final product.
Specifications:-
- ATM 25500kg
- Approximate Tare weight 7000kg
- Approximate Carrying capacity 18500kg
- Float length 9020mm
- Float width 2490mm
- Drawbar length 2100mm with weld on towing eye hitch
- Top deck length 2080mm Internal tie down points measured from front of float at 150mm, 900mm, 1750mm
- Step deck length 1000mm Internal tie down points measured from start of step down 370mm
- Flat deck length 4930mm Internal tie down points measured from start of flat deck 300mm, 1250mm, 2200mm, 2825mm, 4100mm
- Beaver tail length 1400mm Internal tie down points measured from start of beaver tail 900mm
- 2 x double acting hydraulic battery power loading ramps length 2860mm, 800mm width
- Main Chassis fabricated beams
- Rear mud guards & mud flaps
- Float Floor 5mm checker plate flush surface finish
- Coaming rail with internal tie down points at 500mm intervals
- 2 x step up points, one either side of float ( mounting location TBC )
- 1 x Front landing leg on drawbar
- 2 x relevant rated safety chains on drawbar
- 2 x rear stabiliser legs (hydraulic or diesel operated if possible) OR manual locking pins which need to be easily accessible from either side of float
- 1 x 600mm high witches hat holder on FRHS of float deck ( hat base to sit flush on float deck )
- 1 x long handle broom holder ( mounting location TBC during fabrication )
- 1 x 20 litre polished alloy water tank with accessible ball valve type tap.
- 2 x 1200mm length x 550mm depth powder coated toolboxes with 10mm lockable shank receptor ( one toolbox on either side of float )
- 1 x 12mm reinforced plate section on beaver tail flush surface finish mounted for backhoe bucket in travel position ( location TBC )
- 1 x 12mm reinforced plate section on step deck flush surface finish mounted for excavator hitch knuckle in travel position ( location TBC )
- 1 x ballrace turntable dolly with air lock, front & rear mud flaps & a remote grease bank
- Axels 19.50inch 8 stud ABS compliant
- Laser axel alignment
- Full steel wheel rims
- 1 x spare tyre carrier underside mounted
- 2 x spare tyres & rims ( 1 of mounted in above carrier )
- 265/70/19.50 low profile tyres
- All tyres fitted with valve extenders
- Wheel brace
- Air bag suspension
- Full air brakes with ABS module, 12 volt ABC / Maxus brake kit
- 12 volt powered system
- 1 x Fully enclosed steel boot for power pack
- Full multi volt LED lights
- 2 x LED reversing lights on loading ramps
- 1 x LED amber revolving flashing light with cigarette lighter plug connector mounted to RHS loading ramp
- 1 x 50 amp Anderson plug mounted on front of draw bar powering 1 x BC/DC charger
- Rear loading ramp controls mounted in an easily accessible position
- Finished colour White 2 pack enamel paint
- 12 months Victorian registration
- 1 x owner operators manual
- Full ADR & OHS compliant signage
- 1 x oversize kit
The following information should be included in your tender:
- Tender Number
- Quote for new machine with details regarding machine specifications and additional features as listed above.
- Supply and delivery timeframes.
- Back up service details
Selection Criteria
The following factors will form the basis for the comparative evaluation of the tenders:
- Demonstrated experience and track record in supplying similar plant items
- Back up service and availability of parts
- Suitability and fit for purpose
- Commensurate Tender Price