Closed

Jansz-Io Field Control Station Offshore Platform - Fire and Gas detector system (FGS)

Tender ID: 415132


Tender Details

Tender #:
-  
Status:
Closed
Publish Date:
5 March 2020
Closing Date:
20 March 2020

Tender Description

⁠⁠⁠Sembcorp Marine is seeking expressions of interest from service providers able to provide a Fire and Gas detector system (FGS) for Filed Control Station (FCS) on the new J-IC project facilities as an extension to Gorgon Foundation Project. Vendor/Supplier shall be responsible for the design, engineering, documentation, assembly, coating/painting, inspection, testing and supply of complete Fire and Gas system.
Vendor shall assist at site to erect, install and complete the precommissioning, commissioning and start-up activities of Fire and Gas detector system (FGS).

The scope of supply shall include:

  •  Fire detectors (Flame, Heat, Smoke)
  •  Gas detectors (Toxic, Explosive)
  •  Manual alarm call points
  •  Addressable FGS panel
  •  All necessary mounting kits
  •  Sensor calibration sets
  •  Startup and commissioning spare
  •  2- years operational spare
  •  Special tools as required
  •  Junction box
  •  Very Early Smoke Detection Apparatus (VESDA)
  •  Special cables, Pre wired assembly as applicable

Specific Requirements

  •  FGS device housing shall be 316L stainless steel.
  •  Electrical cable entries shall be M20 x 1.5 ISO.
  •  Devices shall be a 24V DC powered devices.
  •  Detector output shall be 4 – 20 mA signal
  •  Capable for HART communication protocol
  •  Resistance to EMI/RFI interference.
  •  Suitable for single operator calibration
  •  Minimum SIL 2 rated.

Preferred Detectors type as applicable:

  •  IR point gas detectors.
  •  IR open path (OP) gas detectors.
  •  Hydrogen (H2) Gas Detectors for battery room.
  •  CO2 detector type shall be infrared (IR) absorption type.
  •  IR3 Optical Flame Detectors.
  •  Optical Smoke detectors.
  •  All detectors shall be Addressable type
  •  Conventional type gas detector

Notes:

Vendor scope of supply shall comply to below requirements,

  •  Certificate of conformity in accordance with AUS Ex/ANZ Ex or IEC Ex.
  •  Compliance with DNV class, IEC, AS/NZS applicable standards as specified in project specifications. 

Location

Western Australia   :   Gascoyne   :   Goldfields/Esperance   :   Great Southern   :   Kimberley   :   Mid West   :   Peel   :   Perth Metropolitan   :   Pilbara   :   South West   :   Wheatbelt  

Similar Tenders

Related tenders matching this tender's categories and regions.