College is looking for reputable Automatic Gate Installation supplier to supply and install Electronic Boom gate with intercom and installation.

A boom gate with intercom and installation requires specific technical specifications for the boom gate itself, the intercom system, and the installation process.

The works under this subsection shall

Comprise the design, manufacture, installation, commissioning, training and maintenance of the following described gate system/s.

The work shall include, but not be limited to

The supply and installation of 2 x power operated boom gate systems at College Front Entrance .

 Either can control the vehicle boom gate system/s or a combination of access control, voice communication systems, wireless remote transmitters or traffic management systems.

 The objectives of this system/s are designed to provide reliable traffic control, warn of danger, and/or provide traffic calming opportunities.

 The boom gate shall be an approved stock model electrically operated with barrier system.

 It shall be operated by 240 volt, single phase, and should be fitted with a Torque Drive Motor.

The motor should be installed in a position without causing damage to the motor or gearing. In the event of power failure the barrier boom shall automatically raise and be able to be operated by hand easily without having to use a crank handle and/or open up the cabinet.

The barrier cabinet shall be constructed of sheet metal and power coated painted red and white.

The boom arm shall be made of aluminium round section powder coat painted white and fitted with red reflective tape.

The controls i.e. logic, detector shall be of plug in modular unit type.

The boom gate operation shall be quiet and smooth

 • The system must be reliable, functional and shall be based on the proven technology for performance systems.

• Provision of a 240-volt 15Amp circuit to power each boom gate system/s and other associated equipment. This shall be from the nearest suitable existing switchboard.

• Allowance to supply all necessary conduit work associated with the cabling to all the relevant National Standards (i.e. electrical orange, data white).

 • Allowance to conduit and cable all equipment points at each gate intersection so as to interconnect these locations.

• Allow training of all relevant site personnel on each site in the proper use of their system.

• Supply as one copy of technical and maintenance manuals per gate system installation.

• Reputable company should be able to demonstrate on an existing site where they have installed all equipment specifically as specified with emphasis on all safety systems.

• The systems provided overall are the latest in technology and upgradeable without major parts redundancy. All operations are smooth, quiet, and 100% duty cycle.

For further information or to respond to this tender please e-mail: principal@minarah.nsw.edu.au