NSW National Parks and Wildlife Service (NPWS) requires suitably experienced & qualified supplier to undertake civil works to reduce the geotechnical risks to road users at the site– Elliott Way 27.5km.

Project goals

Please refer to the RFT documents

Scope

The main steps involved in this remediation option are outlined below:

•  Provide works methodology, program, WHS and environmental plans for the works.
•  Mobilise to the site and establish safety and environmental controls.
•  Implement intermittent lane closures along this section of Elliott Way to ensure safe access for earthmoving and excavation equipment.
• Follow any environmental regulations and obtain necessary approvals for vegetation removal or trimming that may be required to complete the works.
•  Use a large excavator with an extended reach to access and reshape the upslope cutting face.
•  Trim back the rock face, removing semi-detached blocks, loose materials, and hazardous features identified during the site inspection.
•  Excavate and enlarge the existing table drain, positioned at the toe of the slope.
•  The table drain is to be sufficiently sloped to divert water effectively, preventing erosion and reducing saturation that could destabilise the slope.
•  Implement erosion control measures, such as hydroseeding or applying erosion matting to the trimmed slope, where feasible (and in known drainage paths), to encourage vegetation regrowth and minimise surface erosion.
•  Clean site and demobilise.

Requirements

Mandatory requirements

A. Scheme membership (SCM0256) *

Construction

This procurement category has a mandated scheme.

This category has a mandated scheme; to be awarded this contract, you may need to be a member of the Construction Scheme for works up to $1 million SCM0256.

Are you a member of SCM0256?

Response type

Radio button (Yes/No)

Opportunity requirements

1. Mandatory Criteria

MANDATORY PRE-TENDER BRIEFING:

Tenderers must attend the mandatory online pre-tender briefing that is expected to occur between 12 May 2025 and 14 May 2025. For the pre-tender briefing to be arranged, Tenderers must email preferred times of availability within the above dates to the Contact Person’s nominated email address at least 3 Business Days before the nominated date.

Response type

Radio button (Yes/No)

2. RFT Requirements

Please refer to the attached RFT documents.

Please download and complete the attached tender documentation. Once completed, save and upload your response. You can keep editing your response until 3 pm of the closing date.

** Please see the related link of documents for details.**