1.(a) The purpose of this Request for Tender is to establish a preferred panel of contractors to perform part or all of the following services on an ‘as required’ basis throughout the term of the agreement. The preferred list of contractors will be capable of providing the following services:

• (i) Supply and install chain wire fencing
• (ii) Remove and dispose of existing section, and replace with new chain wire fencing parts
• (iii) Supply and install steel post and rail.
• (iv) Remove and dispose of existing section and replace with new steel post and rail parts.
• (v) Supply and install RMS rural road boundary fencing.
• (vi) Supply and install bushland boundary fencing.
• (vii) Supply and install balustrade fencing.
• (viii) Remove and dispose of existing section and replace with new balustrade fencing parts.
• (ix) Supply and install boundary fencing for premises.
• (x) Remove and dispose of existing section and replace with new boundary fencing parts.
• (xi) Construction of new concrete strip for fixing of base plate type fencing
• (xii) Removal of existing fencing and disposal of site to contractor's tip / facility
• (xiii) Supply and install of safety barrier systems.
• (xiv) Remove and dispose of existing section, and replace with new safety barrier system parts.
• (xv) Supply and install bollards (technical information, catalogue and photos to be provided by Contractor)
• (xvi) Supply and delivery of bollards to Council's Depot at Copeland Street, Kingswood
• (xvii) Removal and Disposal of Existing Bollards

(b) The categories and type of work expected to be performed is more fully described below.

(c) Through this tender process Council may establish an approved panel of Contractor’s ranked in order of preference based on the evaluation criteria.

(d) Council has the right to select contractors to provide part of or all the services.

(e) The first ranked Supplier will be given first option to carry out the works required, if they are unavailable to perform the work or deliver within the time required or default in their responsibilities under the agreement, then the second ranked Supplier will be selected and so on.

(f) Where specific major work is required each company on the Panel of Contractors may be invited to submit a lump sum price for the work. In these instances the Company providing the best value offer will be awarded the work.

(g) The allocation of all other work will be on an as required basis in accordance with the header terms and conditions with no guarantee of the volume of work required.

(h) Tenderers are required to provide the costs for each designated category of work

(i) The scope of services includes all existing Council structures, any new installations and repairs to all existing Council owned fencing.

(j) The supplier may be required to quote supplies for jobs being performed by a contractor performing works on a larger overall project. The supplier is to provide the pricing quoted in this tender.

(k) The Work is awarded on a schedule of rates basis in accordance with the tender pricing schedules herein.

(l) The contract may be awarded to a panel of suppliers. This will be determined at the time of reviewing the responses.

(m) Council may choose to award different items to different contractors. This will also be determined at the time of the evaluation of the responses and based on the products supplied by contractors.

(n) Council will issue separate orders for each work requirement. The range of fencing products required is described in the specification below. Council makes no representation or guarantee in regard to the exact quantity of items required throughout the period of the agreement.

2. Duty of Care

• (a) All staff performing the required Services must be trained in the use of all equipment and in safe chemical handling procedures.
• (b) Work Health & Safety issues relating to chemical safety and manual handling must be observed by the Contractor at all times during the performance of the Service.

3. Notes on Pricing Schedule

• (a) Completing this pricing schedule
• (b) Tenderers MUST complete the Section 'Day work' as compliance requirements.
• (c) Tenderers are encouraged to include all of the Part’s A, B and C to increase job opportunity in the panel. Council reserve right to accept whole or part of the tender at its own discretion.
• (d) Tenderers must price all items in the same part. Incomplete pricing schedule will render tender submission invalid. Refer to the Note 1 below for more detail. All prices submitted in this pricing schedule shall be GST exclusive.

4. General requirements

• (a) You MUST complete the relevant part(s) of the pricing schedule by filling in all required fields. Please put your tender offers, 'included' or 'excluded' as the case maybe in the relevant fields and DO NOT put zero, any other wordings or leave any blank. In case of putting 'included', please provide your explanation and detail breakdown of the costs for that item. Council reserves right to accept or not any doubtful pricing on our own merit. Council will not consider any tender in the relevant part(s) with incomplete pricing schedule.
• (b) The quote is on schedule of rates basis. The estimated quantities if any, are for information only. Payment shall be made according to the requirements set out in the Request for Tender and the contract conditions.
• (c) Except for those pay items with separate prices for different job sizes or material types etc, the submitted prices of the corresponding tasks will be applicable for any job sizes and comply to the specifications.

(d) Abbreviations:

• (i) Linear metre = m
• (ii) Linear metre of wire replaced = m of wire
• (iii) Linear metre of rail replaced = m of rail
• (iv) Square metre = sqm
• (v) Cubic metre = cum
• (vi) Each number = Each
• (vii) Each set of the whole system, fixture, etc. = Set
• (viii) Pair of gate posts = Pair
• (ix) Percent = %
• (x) Hour = hr

(e) All measurements shall be to the nearest 2 decimal places, unless otherwise stated.

(f) "Costs for DIAL BEFORE YOU DIG and use of utility authority approved methods in carrying out the required work are deemed to be included in corresponding pay items and shall not be charged separately. Where the Contractor’s method of working results in additional adjustments to their plant being deemed necessary by utility authority, the Contractor will arrange for and bear all costs relevant to those additional adjustments. This applies regardless of any approval to the method of working by council.

(g) The Contractor shall comply with the statutory requirements for maintaining safe working clearance to overhead electrical services."

(h) Pay items shall generally cover the costs on:

(i) Where the pay item specified, traffic management throughout the work include the provision of up to 1 traffic controller. Additional traffic controller shall be paid by day work pay item;

• (ii) RMS permit for works if required;
• (iii) necessary erosion and sediment control measures;
• (iv) dial-before-you-dig;
• (v) costs of all materials, plant and equipment;
• (vi) standard concrete footing as per drawings or alternative footing as specified and covered by corresponding extra over items;
• (vii) remove all materials off site as per the Note 8;
• (viii) activities to carry out the works in entirety;
• (ix) WHS management;
• (x) quality management including inspection and testing."

(i) All excavated, demolished materials and surplus materials shall, at the Contractor's cost, be removed off site for re-use, recycling as per the best industry practices on cirular economy or, if these options are unavailable and as the last resort, be disposed off site at the Contractor's cost.

(j) If additional traffic control is required to be engaged, prior approval of Council shall be obtained. Payment for additional traffic control will be made on the day works rate.

Part A - Fencing for general, pedestrian, parks, boundary, and security purposes

Supply and install chain wire fencing

5. heavy duty galvanized, without rails as per standard drawing A(BS)159M Rev A, for various heights

• (a) 900mm high
• (b) Extra over to Item 5.a for use of black powder coated posts & black PVC coated chain wire
• (c) 1200mm high
• (d) Extra over to Item 5.c for use of black powder coated posts & black PVC coated chain wire
• (e) 1500mm high
• (f) Extra over to Item 5.e for use of black powder coated posts & black PVC coated chain wire
• (g) 1800mm high
• (h) Extra over to Item 5.g for use of black powder coated posts & black PVC coated chain wire
• (i) 2100mm high
• (j) Extra over to Item 5.i for use of black powder coated posts & black PVC coated chain wire
• (k) 2400mm high
• (l) Extra over to Item 5.k for use of black powder coated posts & black PVC coated chain wire
• (m) Extra over to Items 5.a, 5.c, 5.e, 5.g, 5.i and 5.k for use of base plate in lieu of concrete footing

6. heavy duty galvanised, with rails as per the following standard drawings indicated in the pay items

• (a) 900mm high as per standard drawing A(BS)156M Rev A, with concrete footing
• (b) Extra over to Item 6.a for use of black powder coated posts & rail and black PVC coated chain wire
• (c) Extra over to Item 6.a for use of footing spike in lieu of concrete footing (Refer to the 'Detail A' of the drawing)
• (d) 1200mm high as similar to standard drawing A(BS)156M Rev A, with concrete footing
• (e) Extra over to Item 6.d for use of black powder coated posts & rail and black PVC coated chain wire
• (f) Extra over to Item 6.d for use of footing spike in lieu of concrete footing (Refer to the 'Detail A' of the drawing)
• (g) 1500mm high as similar to standard drawing A(BS)160M Rev A, with concrete footing
• (h) Extra over to Item 6.g for use of black powder coated posts & rail and black PVC coated chain wire
• (i) 1800mm high as per standard drawing A(BS)160M Rev A, with concrete footing
• (j) Extra over to Item 6.i for use of black powder coated posts & rail and black PVC coated chain wire
• (k) 2100mm high similar to standard drawing A(BS)155M Rev A, with concrete footing
• (l) Extra over to Item 6.k for use of black powder coated posts & rail and black PVC coated chain wire
• (m) 2400mm high as per standard drawing A(BS)155M Rev A, with concrete footing
• (n) Extra over to Item 6.m for use of black powder coated posts & rail and black PVC coated chain wire
• (o) 3000mm high as similar to standard drawing A(BS)157M Rev A, with concrete footing
• (p) Extra over to Item 6.o for use of black powder coated posts & rail and black PVC coated chain wire
• (q) 3600mm high as per standard drawing A(BS)157M Rev A, with concrete footing
• (r) Extra over to Item 6.q for use of black powder coated posts & rail and black PVC coated chain wire
• (s) 6000mm high as per standard drawing A(BS)158M Rev B, with concrete footing
• (t) Extra over to Item 6.s for use of black powder coated posts & rail and black PVC coated chain wire
• (u) Extra over to Items 6.a, 6.d, 6.g, 6.i, 6.k and 6.m (2.4m high or below) for use of base plate in lieu of concrete footing

7. Gate for chain wire fencing including use of gate posts, stays as per standard drawings and door fittings (hinge, latch, locking bracket)

• (a) 900mm high - 3.4m wide double gate
• (b) 900mm high - 0.9m wide single gate for pedestrian access
• (c) 1200mm high - 3.4m wide double gate
• (d) 1200mm high - 0.9m wide single gate for pedestrian access
• (e) 1500mm high - 0.9m wide single gate for pedestrian access
• (f) 1500mm high - 3.6m wide double gate for vehicular access
• (g) 1800mm high - 0.9m wide single gate for pedestrian access
• (h) 1800mm high - 3.6m wide double gate for vehicular access
• (i) 2100mm high - 0.9m wide single gate for pedestrian access
• (j) 2100mm high - 3.6m wide double gate for vehicular access
• (k) 2400mm high - 0.9m wide single gate for pedestrian access
• (l) 2400mm high - 3.6m wide double gate for vehicular access
• (m) 3000mm high - 0.9m wide single gate for pedestrian access
• (n) 3000mm high - 3.6m wide double gate for vehicular access
• (o) 3600mm high - 0.9m wide single gate for pedestrian access
• (p) 3600mm high - 3.6m wide double gate for vehicular access
• (q) 6000mm high - 0.9m wide single gate for pedestrian access
• (r) 6000mm high - 3.6m wide double gate for vehicular access

8. Barbed wire options

• (a) Barbed wire above chain wire fencing
• (b) Extra over for using cranked posts for chain wire fencing with barbed wire

Remove and dispose of existing section, and replace with new chain wire fencing parts

9 Chain wire mesh (including strainer wire if required in the standard drawings)

• (a) 900mm high
• (b) 1200mm high
• (c) 1500mm high
• (d) 1800mm high
• (e) 2400mm high
• (f) 3000mm high
• (g) 3600mm high
• (h) 6000mm high

10. Post (including concrete footing as per standard drawings)

• (a) Post for 900mm high fence
• (b) Post for 1200mm high fence
• (c) Post for 1500mm high fence
• (d) Post for 1800mm high fence
• (e) Post for 2400mm high fence
• (f) Post for 3000mm high fence
• (g) Post for 3600mm high fence
• (h) Post for 6000mm high fence

11. Rails including fittings (as per standard drawings)

• (a) 40NB
• (b) 50NB
• (c) 32NB
• (d) Extra over to Items 11.a and 11.b for replacement above 3m high from the ground

12. Damaged strainer wire only (not with chain wire mesh)

• (a) Strainer wire only

13. Parts for chain wire fencing gate (including concrete footing for posts)

• (a) 0.9m wide single gate panel (for 900mm high fencing)
• (b) Post for single gate (for 900mm high fencing)
• (c) 3.4m wide double gate panel (for 900mm high fencing)
• (d) Post for 3.4m wide double gate (for 900mm high fencing)
• (e) 0.9m wide single gate panel (for 1200mm high fencing)
• (f) Post for single gate (for 1200mm high fencing)
• (g) 3.4m wide double gate panel (for 1200mm high fencing)
• (h) Post for 3.4m wide double gate (for 1200mm high fencing)
• (i) 0.9m wide single gate panel (for 1500mm high fencing)
• (j) Post for single gate (for 1500mm high fencing)
• (k) 3.6m wide double gate panel (for 1500mm high fencing)
• (l) Post for double gate (for 1500mm high fencing)
• (m) 0.9m wide single gate panel (for 1800mm high fencing)
• (n) Post for single gate (for 1800mm high fencing)
• (o) 3.6m wide double gate panel (for 1800mm high fencing)
• (p) Post for double gate (for 1800mm high fencing)
• (q) 0.9m wide single gate panel (for 2100mm high fencing)
• (r) Post for single gate (for 2100mm high fencing)
• (s) 3.6m wide double gate panel (for 2100mm high fencing)
• (t) Post for double gate (for 2100mm high fencing)
• (u) 0.9m wide single gate panel (for 2400mm high fencing)
• (v) Post for single gate (for 2400mm high fencing)
• (w) 3.6m wide double gate panel (for 2400mm high fencing)
• (x) Post for double gate (for 2400mm high fencing)
• (y) 0.9m wide single gate panel (for 3000mm high fencing)
• (z) Post for single gate (for 3000mm high fencing)
• (aa)3.6m wide double gate panel (for 3000mm high fencing)
• (ab)Post for double gate (for 3000mm high fencing)
• (ac) 0.9m wide single gate panel (for 3600mm high fencing)
• (ad) Post for single gate (for 3600mm high fencing)
• (ae) 3.6m wide double gate panel (for 3600mm high fencing)
• (af)Post for double gate (for 3600mm high fencing)
• (ag)0.9m wide single gate panel (for 6000mm high fencing)
• (ah)Post for single gate (for 6000mm high fencing)
• (ai) 3.6m wide double gate panel (for 6000mm high fencing)
• (aj) Post for double gate (for 6000mm high fencing)
• Supply and install steel post and rail

14. 750mm high, configuration as per standard drawings A(BS)153M Rev B

• (a) Installed in ground with concrete footing
• (b) Extra over to Item 14.a for base plate in lieu of in-ground concrete footing
• (c) Extra over to Item 14.a for mortared connection for existing bridge/culvert (see Note 8 of the drawing)
• (d) Extra over item for 14.a for use of black powder coated posts & rails

15. 1017mm high, configuration as per standard drawings A(BS)154M Rev A

• (a) Single rail, installed in ground with concrete footing
• (b) Extra over to Item 15.a for base plate in lieu of in-ground concrete footing
• (c) Extra over to Item 15.a for mortared connection for existing bridge/culvert (see Note 8 of the drawing)
• (d) Extra over to Item 15.a for additional rail for dual rails
• (e) Extra over to Item 15.a for use of black powder coated posts & single rails
• (f) Extra over to Item 15.e for dual rails

16. Gate for steel posts and rails including use of gate posts, stays as per standard drawings and door fittings (hinge, latch, locking bracket)

• (a) Standard Park entrance gate as per standard drawing A(BS)152M Rev C with gate posts and concrete footing

Remove and dispose of existing section, and replace with new steel post and rail parts

17. Post including footing

• (a) 750mm high, configuration as per standard drawings A(BS)153M Rev B
• (b) 1017mm high, configuration as per standard drawings A(BS)154M Rev A
• 18. Rail including fittings
• (a) 50NB, top rail
• (b) 40NB, bottom rail

19. Parts for gate as per standard drawings including fittings (hinge, latch, locking bracket)

• (a) Boom rail as per standard drawing A(BS)152M Rev C
• (b) Gate posts (including 1 hinge post and 2 catcher posts) as per standard drawing A(BS)152M Rev C with concrete footing

Supply and install RMS rural road boundary fencing

20. 1200mm high rural fencing (in accordance with RMS R201 specification and drawing nos. R0800-01 to 04), including the required strainer posts, intermediate stays in the drawings

• (a) Wire fence - Softwood posts
• (b) Wire fence - Hardwood posts
• (c) Wire fence - Galvanised steel posts
• (d) Wire fence - prestressed concrete posts
• (e) Rabbit proof fence - Softwood posts
• (f) Rabbit proof fence - Hardwood posts
• (g) Rabbit proof fence - Galvanised steel posts
• (h) Rabbit proof fence - Prestressed concrete posts
• (i) Cattle proof fence - Softwood posts
• (j) Cattle proof fence - Hardwood posts
• (k) Cattle proof fence - Galvanised steel posts
• (l) Cattle proof fence - Prestressed concrete posts
• (m) Alternative stock proof fence - Softwood posts
• (n) Alternative stock proof fence - Hardwood posts
• (o) Alternative stock proof fence - Galvanised steel posts
• (p) Alternative stock proof fence - Prestressed concrete posts
• (q) Temporary star picket and wire fence
• (r) "Modified wire fence (refer to layout titled ""Wire fence"" in the RMS drawing no. R0800-02):
• (s) star picket posts at 6m centres with galvanised steel droppers at 2m spacing similar to the temporary star picket and wire fence
• (t) install the top 3 rows of wire using 4mm galvanised wire and install 600mm high rabbit proof netting or similar from ground level"
• (u) Extra over to Item 20.r for use of galvanised steel posts in lieu as per RMS drawings

21. Gate for RMS rural road boundary fencing including use of gate posts, stays as per RMS R0800-04 and door fittings (hinge, latch, locking bracket)

• (a) 3.6m wide fence gate with softwood posts
• (b) 3.6m wide fence gate with hardwood posts
• (c) 3.6m wide fence gate with galvanised steel posts
• (d) 3.6m wide fence gate with prestressed concrete posts

Supply and install bushland boundary fencing

22. Galvanised steel lipped channel post with PVC protective caps and twin 19mm cables as per attached sketch in Appendix J4

• (a) 900mm high fencing

Supply and install balustrade fencing

23. Weld mesh fencing as per PCC standard drawing A(BS)165M Rev A

• (a) 1350mm high in total, with 1200mm panel height, with concrete footing
• (b) Extra over to Item 23.a for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (c) Extra over to Item 23.a for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (d) Extra over for Item 23.a for use of base plate in lieu of concrete footing

24. Pedestrian fencing as per PCC standard drawing A(BS)162M Rev B

• (a) 1350mm high in total, with 1200mm spacing between panel rails and concrete footing
• (b) 1500mm high in total, with 1350mm spacing between panel rails and concrete footing
• (c) Extra over to Items 24.a & 24.b for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (d) Extra over to Items 24.a & 24.b for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (e) Extra over to Items 24.a & 24.b for use of base plate in lieu of concrete footing

25. RMS pedestrian fence as per RMS drawing no. R0800-10

• (a) Type 1 verge or median type, with concrete footing
• (b) Extra over for Item 25.a for use of base plate in lieu of concrete footing

26. Sports field fencing

• (a) Steel cricket fence as per standard drawings A(BS)167M Rev A
• (b) Extra over to Item 26.a for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (c) Extra over to Item 26.a for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (d) Sports field fence (black) as per standard drawings A(BS)174M Rev A
• (e) Extra over to Item 26.d for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (f) Extra over to Item 26.d for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (g) Extra over to Item 26.d for use of base plate in lieu of concrete footing

27. Gate for balustrade fencing including use of gate posts, stays as per standard drawings and door fittings (hinge, latch, locking bracket)

• (a) Gate for pedestrian fence (standard drawing A(BS)162M Rev C) - 1m wide x 1.2m high single pedestrian gate, with self-closing hinges and child proof lock
• (b) Gate for pedestrian fence (standard drawing A(BS)162M Rev C) - 1m wide x 1.5m high single pedestrian gate, with self-closing hinges and child proof lock
• (c) Gate for weld mesh fence (standard drawing A(BS)165M Rev A) - 0.9m wide single pedestrian gate
• (d) Gate for weld mesh fence (standard drawing A(BS)165M Rev A) - 3.4m wide double vehicular gate
• (e) Gate for steel cricket fence (standard drawings A(BS)167M Rev A) - 0.9m wide single pedestrian gate
• (f) Gate for steel cricket fence (standard drawings A(BS)167M Rev A) - 3.4m wide double vehicular gate
• (g) Gate for sports field fence (standard drawings A(BS)174M Rev A) - 0.9m wide single pedestrian gate
• (h) Gate for sports field fence (standard drawings A(BS)174M Rev A) - 3.4m wide double vehicular gate

Remove and dispose of existing section, and replace with new balustrade fencing parts

28. Weld mesh fencing as per standard drawing A(BS)165M Rev A

• (a) Posts with concrete footing
• (b) Extra over to Item 28.a for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (c) Extra over to Item 28.a for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (d) Extra over to Item 28.a for use of base plate in lieu of concrete footing
• (e) Weld mesh panel with fittings, length to suit existing

29. Pedestrian fencing as per standard drawing A(BS)162M Rev B

• (a) Post with concrete footing for 1350mm high (total) fence
• (b) Post with concrete footing for 1500mm high (total) fence
• (c) Extra over to Items 29.a & 29.b for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (d) Extra over to Items 29.a & 29.b for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (e) Extra over to Items 29.a & 29.b for use of base plate in lieu of concrete footing
• (f) Fencing panel with fittings for 1350mm high (total) fence, length to suit existing
• (g) Fencing panel with fittings for 1500mm high (total) fence, length to suit existing

30. RMS pedestrian fence as per RMS drawing no. R0800-10

• (a) Post with concrete footing for Type 1 verge or median type
• (b) Extra over to Item 30.a for use of base plate in lieu of concrete footing
• (c) Fencing panel with fittings for Type 1 verge or median type, length to suit existing
• (d) Re-painting of existing pedestrian fence on bridge, including removal of old flaky paint and priming accessible from bridge deck level

31. Sports field fencing

• (a) Post with concrete footing for steel cricket fence as per PCC standard drawings A(BS)167M Rev A
• (b) Extra over to Item 31.a for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (c) Extra over to Item 31.a for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (d) Sports field fence (black) as per standard drawings A(BS)174M Rev A
• (e) Extra over to Item 31.d for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (f) Extra over to Item 31.d for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (g) Extra over to Item 31.d for use of base plate in lieu of concrete footing
• (h) Fencing panel with fittings for steel cricket fence, length to suit existing
• (i) Fencing panel with fittings for sports field fence, length to suit existing

32. Pool type fencing as per standard drawing A(BS)163M Rev A

• (a) Posts with concrete footing
• (b) Extra over to Item 32.a for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (c) Extra over to Item 32.a for use of footing spike in lieu of concrete footing (Refer to the 'Detail B' of the drawing)
• (d) Extra over to Item 32.a for use of base plate in lieu of concrete footing
• (e) Fencing panel with fittings, length to suit existing

Supply and install boundary fencing for premises

33. Security fencing, in black, as per standard drawing A(BS)164M Rev B

• (a) 1800mm high with concrete footing
• (b) 2100mm high with concrete footing
• (c) Extra over to Items 33.a, 33.b for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (d) Extra over to Items 33.a, 33.b for use of base plate in lieu of concrete footing

34. Coloured steel fencing, 2.4m long panel (Colourbond® or equivalent), including end posts, gate posts, intermediate posts and stepped panel for slope treatment as per manufacturer's installation requirements

• (a) 1200mm high with concrete footing
• (b) 1500mm high with concrete footing
• (c) 1800mm high with concrete footing
• (d) 2100mm high with concrete footing
• (e) Surcharge for raking in lieu of stepped panels for sloping section

35. Timber lapped fence as per drawing SLD-13-023 in Appendix J5

• (a) 1800mm high in total with concrete footing

36. Gate for security fencing, in black, as per standard drawing A(BS)164M Rev B including use of gate posts and door fittings (hinge, latch, locking bracket)

• (a) 1m wide single gate for pedestrian access for 1800mm high fencing
• (b) 3.4m wide double gate for vehicular access for 1800mm high fencing
• (c) 1m wide single gate for pedestrian access for 2100mm high fencing
• (d) 3.4m wide double gate for vehicular access for 2100mm high fencing

37. Gate for Colourbond fence including use of gate posts and door fittings (hinge, latch, locking bracket)

• (a) 1200mm high - 910mm wide single gate for pedestrian access
• (b) 1200mm high - 3400mm wide double gate for vehicular access
• (c) 1500mm high - 910mm wide single gate for pedestrian access
• (d) 1500mm high - 3400mm wide double gate for vehicular access
• (e) 1800mm high - 910mm wide single gate for pedestrian access
• (f) 1800mm high - 3400mm wide double gate for vehicular access
• (g) 2100mm high - 910mm wide single gate for pedestrian access
• (h) 2100mm high - 3400mm wide double gate for vehicular access

Remove and dispose of existing section, and replace with new boundary fencing parts

38. Security fencing, in black, as per standard drawing A(BS)164M Rev B

• (a) Posts for 1800mm high fence with concrete footing
• (b) Posts for 2100mm high fence with concrete footing
• (c) Extra over to Items 38.a & 38.b for use of footing sleeve with steel wedges (Refer to the 'Detail A' of the drawing)
• (d) Extra over to Items 38.a & 38.b for use of base plate in lieu of concrete footing
• (e) Fencing panel for 1800mm high fence with fittings, length to suit existing
• (f) Fencing panel for 2100mm high fence with fittings, length to suit existing

39. Coloured steel fencing, 2.4m long panel (Colourbond® or equivalent), including end posts, gate posts, immediate posts and raking as per manufacturer's installation requirements

• (a) Posts for 1200mm high fence with concrete footing
• (b) Posts for 1500mm high fence with concrete footing
• (c) Posts for 1800mm high fence with concrete footing
• (d) Posts for 2100mm high fence with concrete footing
• (e) Fencing panel for 1200mm high fence with fittings, length to suit existing
• (f) Fencing panel for 1500mm high fence with fittings, length to suit existing
• (g) Fencing panel for 1800mm high fence with fittings, length to suit existing
• (h) Fencing panel for 2100mm high fence with fittings, length to suit existing

40. Timber lapped fence as per drawing SLD-13-023

• (a) Post with concrete footing
• (b) Rails including fittings, length to suit existing
• (c) Palings

Construction of new concrete strip for fixing of base plate type fencing

41. Construction of concrete strip including excavation, form working and backfilling

• (a) Concrete grade N32
• (b) Installation of holding down bolt in lieu of chemset fasteners shown on the drawings
• (c) Extra over item 41.a to reinforcement (using SL72 mesh) in concrete strip

Removal of existing fencing and disposal of site to contractor's tip / facility

42. Chain wire fencing

• (a) 900mm high
• (b) 1200mm high
• (c) 1500mm high
• (d) 1800mm high
• (e) 2100mm high
• (f) 2400mm high
• (g) 3000mm high
• (h) 3600mm high
• (i) 6000mm high

43. Steel post and rail

• (a) Single rail
• (b) Dual rail

44. Timber fencing or rail

• (a) Timber post & rail
• (b) Arris fencing
• (c) Timber post & steel rail fencing

45. Balustrade fencing

• (a) Weld mesh fencing
• (b) Pedestrian fencing
• (c) RMS pedestrian fence
• (d) Steel cricket fence
• (e) Sports field fence (black)
• (f) Pool type fencing

46. Boundary fencing

• (a) 1800mm high security fencing
• (b) 2100mm high security fencing
• (c) 1200mm high Colourbond fencing
• (d) 1500mm high Colourbond fencing
• (e) 1800mm high Colourbond fencing
• (f) 2100mm high Colourbond fencing
• (g) 1800mm high timber lapped fence

Part B - Safety Barrier Systems

Supply and install of safety barrier systems

47. TfNSW Approved MASH TL3 W-Beam Guardrail Safety Barrier with Inground Posts at 2m Centres. Excavation and traffic control with 1 traffic controller to be included.

• (a) 0 to 10 metres m
• (b) 10 to 20 metres m
• (c) Over 20 metres m
• (d) Extra over to Items 47.a, 47.b and 47.c for excavation for posts in rock, concrete or asphalt including core drilling each
• (e) Extra over to Items 47.a, 47.b and 47.c for use of base plate in lieu of in-ground post (including anchor bolts) each

48. TfNSW Approved MASH TL4 Thriebeam Guardrail Safety Barrier with Inground Posts at 2m Centres. Excavation and traffic control with 1 traffic controller to be included.

• (a) 0 to 10 metres m
• (b) 10 to 20 metres m
• (c) Over 20 metres m
• (d) Extra over to Items 48.a, 48.b and 48.c for excavation for posts in rock, concrete or asphalt including core drilling each
• (e) Extra over to Items 48.a, 48.b and 48.c for use of base plate in lieu of in-ground post (including anchor bolts) each

49. TfNSW Approved MASH TL3 wire rope safety barrier as per manufacturer's instruction including in ground post, ropes and all required fittings. Excavation and traffic control with 1 traffic controller to be included.

• (a) 0 to 10 metres m
• (b) 10 to 20 metres m
• (c) Over 20 metres m
• (d) Extra over to Items 49.a, 49.b and 49.c for excavation for posts in rock, concrete or asphalt including core drilling each

50. TfNSW Approved MASH Compliant Guardrail End Terminals. Excavation and traffic control with 1 traffic controller to be included.

• (a) MASH TL2 Guardrail End Terminal (for posted speeds = 70km/h) (Please specify: MSKT-TL2) each
• (b) MASH TL3 Guardrail End Terminal (for posted speeds 70km/h) (Please specify: MSKT-TL3) each
• (c) 4m Trailing Terminal (TT) each
• (d) Extra over to Items 50.a, 50.b and 50.c for excavation for posts in rock, concrete or asphalt including core drilling each

51. TfNSW Approved MASH Compliant Crash Cushions. Excavation and traffic control with 1 traffic controller to be included.

• (a) MASH tested products - accepted (Please specify: Hercules TL3-P) each
• (b) Please add more lines if more than one product is provided. Each
• (c) Extra over to Items 51.a for excavation for posts in rock, concrete or asphalt including core drilling each

Remove and dispose of existing section, and replace with new safety barrier system parts

52. Existing W beam safety barrier system. Excavation and traffic control with 1 traffic controller to be included.

• (a) In-ground standard post, including standard block out if necessary each
• (b) Extra over to Item 52.a for use of base plate in lieu of in-ground post (including anchor bolts) each
• (c) W beam rail, including stiffening piece if necessary m
• (d) MELT for W beam safety barrier system each
• (e) TT for W beam safety barrier system each

53. Existing thrie beam safety barrier system. Excavation and traffic control with 1 traffic controller to be included.

• (a) In-ground standard post, including standard blockout if necessary each
• (b) Extra over to pay item 53.a for use of base plate in lieu of in-ground post (including anchor bolts) each
• (c) Thrie beam rail, including stiffening piece if necessary m

54. Semi-rigid RMS approved wire rope safety barrier system. Excavation and traffic control with 1 traffic controller to be included.

• (a) Section of damaged wire rope safety barrier system (Flexfence) including de-tensioning, re-tensioning of wires if necessary, replacement of damaged posts and associated fittings m

(b) Section of damaged wire rope safety barrier system (same type as the pay item B1.3) including de-tensioning, re-tensioning of wires if necessary, replacement of damaged posts and associated fittings.

Part C - Bollards (refer to appendix J6)

Supply and install bollards (technical information, catalogue and photos to be provided by Contractor)

55. Fixed style bollards (including coring hole in concrete or asphalt and concreting in hole)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

56. Removable style bollards (including coring hole in concrete or asphalt, installing pavement socket and fixing locking mechanism)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

57. Lockable demountable base plate bollards (including fixing base plate. Council to provide lock)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

58. Fold down bollards (including fixing base plate. Council to provide lock)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

Supply and delivery of bollards to Council's Depot at Copeland Street, Kingswood

59. Fixed style bollards

• (a) 90mm dia pipe
• (b) 114mm dia pipe

60. Removable style bollards (including supply of pavement socket with locking mechanism)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

61. Lockable demountable base plate bollards (including base plate with locking mechanism and bolts)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

62. Fold down bollards (including base plate with locking mechanism and bolts)

• (a) 90mm dia pipe
• (b) 114mm dia pipe

Removal and Disposal of Existing Bollards

63 Remove existing and dispose

• (a) Fixed in ground bollard
• (b) Removable style in pavement socket bollard
• (c) Lockable demountable base plate bollard
• (d) Fold down bollard