Closed

Gibson Island Project - Piperack Module Fabrication

Tender ID: 537361


Tender Details

Organisation:
Tender #:
AUS1004P0022  
Status:
Closed
Publish Date:
13 September 2023
Closing Date:
27 September 2023

Tender Description

At the time of publishing this invitation to register an interest, the supply includes the procurement, shop detailing, manufacture, fabrication, pre-assembly, testing, packing, marking, and preservation, and supply of the Pre-Assembled Rack (PAR) for the Facility. The scope has been prepared in accordance with the FEED level design. As such the scope includes preassembled and fully welded modules for the following:

• Two and three level truss type pipe racks fully fitted out with piping secured in place;

• Braced towers and trestles for support of truss type pipe racks;

• Single level pipe racks complete with horizontal bracing;

• Braced towers, trestles, and tee posts for support of single level type pipe racks; and

• Provision of lifting lugs, temporary supports and bracing as necessary for handling and transport to site.

A summary of the piping and steel quantities has been included below as a reference:

CommodityCommodity DescriptionQtyUnit
Structural Steel Extra Heavy (>150 kg/m) 64t
Structural Steel Heavy (60-150 kg/m)758t
Structural Steel Light (<25 kg/m)32t
Structural Steel Medium (25-60 kg/m) 402t

SUBTOTAL1258t
PipingPipe B36.10 – Carbon Steel (DN25 – DN1200) 5645m
PipingPipe B36.10 – Stainless Steel (DN40 – DN300) 7247m

SUBTOTAL12492t

All structural steel, piping, supports, etc. shall be in accordance with the relevant Australian standards, approved international standards, and Project specifications. Piping specifications cover carbon and stainless-steel grades, with high purity water lines requiring pickling and passivation. All piping shall be provided in a state fit for installation onsite inclusive of internal surface treatment (i.e. pickling and passivation), external coatings, and surface preparation prior to delivery of the PAR’s. The Factory Acceptance Testing (FAT) must include test fits between adjacent modules, which must be undertaken prior to delivery to site.

Optional Scope:

The supply may also include piping bulks for the Project. The supply will be complete welded, coated, and tested spool pieces inclusive of fittings, flanges, finished ends ready for site welding, as well as green piping for site run sections. The Project, including this package AUS1004P0022 is subject to internal approvals. The procurement process or scope may change at Gibson Island H2’s election, including to accommodate project budget and time requirements.