Plant No 3062 – 2014 MST542 plus Backhoe Loader

⁠⁠⁠VEHICLE OFFERED FOR SALE/TRADE-IN PLANT NO 3062

Plant No. 3062 – 2014 MST542 plus Backhoe Loader, VIN: M542SM2121766, Engine No: NMU154375V, approximately 4000 hours, Registration No. CA81RB until 31 March 2024

TO SUPPLY COUNCIL WITH SIMILAR PLANT TYPE (GST INCLUSIVE)

Quotations Must Include

• Minimum 4 cylinder engine developing 80kw (minimum net engine power) with a pre-cleaner. The cooling system shall be suited to Australian conditions

• Low noise cab with decibel rating provided

• 12 volt electrical system preferred, if 24 volt system is supplied a 24-12 volt inverter is to be supplied

• Integrated air conditioning and heating system with tinted glass

• The machine shall comply with all Federal and State Standards and Regulations

• Hydrostatic transmission preferred. Quoter to state the number of forward and reverse speeds and maximum speed of each gear selected. Neutral isolation switch to be fitted.

• The operator’s platform shall give clear visibility at as many angles as possible

• The controls layout must be within easy reach for operators of all sizes. A fully suspended seat with multiple adjustments and a seat belt shall be fitted. The cab is to meet S.A.E. criteria for ROPS and FOPS and fitted with a fully integrated refrigerant type air conditioner.

• The cab is to be fitted with internal and external rear view mirrors. A rotating amber beacon with protection guard shall be fitted.

• A purpose built and automatic back up alarm shall be fitted and also a clearly audible horn

• All lighting shall comply with the motor traffic act of NSW for 24 hour registration and be suitably guarded

• Front and rear work lights are to be fitted

• Optional equipment (to be listed and priced separately):

• 350mm x 600mm x 750mm backhoe buckets

• A dry chemical fire extinguisher shall be fitted to the machine

• The machine is to have suitable tie down points for transportation

• Common Expiry Date Registration to be carried out to 31st March

• 1 Spare Parts Manual to be included – CD format preferred

• 1 Workshop Manual to be included – CD format preferred

• 1 Operators Manual to be included – hard copy