Sportsground Fencing

⁠⁠⁠Tenders are invited for the supply and installation of fencing at The Sportsground. These works shall be carried out within the guidelines and specifications supplied, including the following works.

SCOPE OF WORKS

Supply materials and install sports oval perimeter fencing as per location map, similar to style pictured above, and in accordance with notes below.

Specify in schedule of rates:
1. per m for installation
2. chain mesh per m or per roll
3. gates, posts and rails per each
4. undertake survey prior to commencement of works to confirm exact location of fencing and gates with Council Superintendent
5. Specify exactly the Defects Liability Period both for labour and materials, if different from that stated in Section 5 above.

Notes:

• Measurements are approximate – contractor to arrange site visit with Council staff and satisfy themselves of the required details for the purpose of preparing the quotation.
• Oval 1 is approximately 590m and Oval 2 approximately 665m.
• 900mm high fence with galvanised chain mesh infill, galvanised posts and rails top and bottom.
• Concrete mow strip and footings.
• 11 x 3m sliding gates, lockable.
• AS 1725.2010 PARTS 5 – Sports ground fencing – General requirements
• Posts, rails, infill and footings used for chain wire mesh fencing and gates must adhere to Australian standards. Corner, strainer and end posts to be 50NB and generally set to a minimum depth of 700mm, whilst intermediate posts need to be 40NB and set to a minimum depth of 600mm.
• NTG - building approval not required for a fence if it is either of the following:

less than 1m high
or does not offer wind resistance - such as a chain wire mesh or metal pool type fencing.