The work comprises the supply of all labour, plant and materials necessary for:

* Site establishment and mobilisation
* Setting out
* Widening of the existing road formation to a minimum of 8.4m
* Supplying, laying and compacting one or two layers of gravel each 100mm thick compacted over the full width of the formation
* Shaping and preparing for bitumen sealing
* Lay bitumen with a 14mm seal
* Lay after 3months a second bitumen seal with 10mm aggregate
* Restore table drains and clean-up site.

The length of work involved is approximately 2km. It is proposed to reshape the existing pavement to an 8.40m wide formation, gravel and lay a 6.4m wide bitumen seal with 14mm aggregate and after three months a second bitumen seal with 10mm aggregate. It is intended that the work will tie into existing floodway’s. The second seal will extend over those flood ways.

The formation cross section will be 3% on the straights and appropriate superelevation around the corners.

The final length and details of the work will be dependent on the available funds through the NT Government Grants program and the tendered prices.

There will be very little alteration to the vertical and horizontal alignment and it is therefore not intended to produce plans for the work.

Council’s Contact Officer: Mr Robert Bright
Telephone: 08 8976 0058

Coomalie Community Government Council
141 Cameron Rd
PO Box 20
BATCHELOR NT 0845