Mawson Lakes Overpass

⁠⁠⁠11118 - The scope of the work is as follows (but may not be limited to):
* Design, construction and installation of a 100m maximum span bridge across Dry Creek, Mawson Lakes, with a maximum width of 3m, which is able to meet the parameters of a shared use trail
* Structure to be hot dipped galvanised steel, with a steel frame and FRP (Fibre Reinforced Polymer) or similar mesh deck.
* A safety handrail must be provided for cyclists/users
* Abutments either side to match into the existing off road path network.
* Regrading of path on approaches as required
* The approaches materiality will need to match the concrete paths material in the vicinity
* Installation of lighting to AS1158, Pedestrian Lighting with a minimum of P3 classification. Power to be sourced from existing street light unmetered supply, which can be found in the adjacent local street network.
* Installation of in stream scour protection around all pylons and abutments as required.
* The Contractor is to be responsible for all approvals and utility searches required for works eg. Development Application, Dial Before U Dig

Tenderers must confirm compliance to the Mandatory Requirements:

Mandatory Requirement                                         Compliance Y/N        Evidence Provided Y/N
Legal entity with registered ABN                             Yes No                      Yes No

Insurance cover in accordance with contract
(if not held currently, the tenderer must be
able to effect the amount(s) and type(s) of
insurance required)                                                Yes No                      Yes No

Licence / Accreditation                                            Yes No                      Yes No

Civil Contractors Federation Integrated
management system, or similar.                              Yes No                       Yes No