Bowen Boat Harbour Entrance Channel Aids to Navigation Upgrade - 2016

⁠⁠⁠The Queensland Government is seeking tenders to undertake the Bowen Boat Harbour Entrance Channel Aids to Navigation Upgrade works.

The main items of work are as follows:
* Supply and fabricate four 356 mm diameter x 12.7 mm thick mild steel pile.
* Transport piles and beacon components to work site.
* Handle, pitch and drive four 356 mm diameter piles.
* Supply, fabricate and galvanize five pile caps.
* Cut off five piles at correct height and install weld-on pile caps.
* Salvage the port daymark from the No. 2 Beacon and deliver to the MSQ yard in Bowen Boat Harbour.
* Supply and install Denso Steelcoat 100 protection system or approved equivalent to pile cap and pile cap splice weld to five beacons.
* Supply and install Denso Seashield 2000FD pile protection system or approved equivalent to five beacons.
* Supply, fabricate and install five 1400 mm diameter work platforms complete with platform mounted daymark frame, port or starboard lateral daymark and lamp stand.
* Supply, fabricate and install galvanized steel ladders to five beacons, complete with clamps to the orientation on the beacon as shown on the Drawings.
* Supply all fasteners including aluminium bolts, u-bolts, nuts and washers; Grade 316 stainless bolts, nuts and washers; galvanized mild steel bolts, nuts and washers; and all bolt insulation products.
* Supply a registered Surveyor to set out replacement beacon positions and pile cut-off height.

This contract does not include:
* The supply and installation of the navigation lights.

For detailed information on the specific works sought under this tender, please review the Section 5 - Specification and the Drawings in the tender documents.